VW Tiguan Left Gearbox Mounting | 2010 – 2016 Transmission Mount Spares

Description

Stabilize your engine bay layout, eliminate severe interior dashboard vibrations, and ensure clean, smooth gear transitions with this premium original VW Tiguan Left Hand Side (LHS / Passenger Side) Gearbox / Transmission Mounting. Thoroughly inspected for rubber elasticity, casting cracks, and internal fluid leaks, this genuine rubber-metal structural support is engineered explicitly for the first-generation Volkswagen Tiguan (5N platform) spanning the 2010 through to 2016 model years. Located directly beneath the battery tray assembly, it serves as the definitive replacement for worn-out, collapsed, or torn factory mounts that can cause drivetrain misalignment and harsh shifting.

Please keep a highly critical structural and drivetrain configuration framework in mind when choosing your replacement chassis mount: Because the first-generation Tiguan uses a transverse engine layout, the left-hand mounting is dedicated solely to supporting the vehicle’s transmission/gearbox.

• • Gearbox Interchangability: Depending on whether your Tiguan is equipped with a 6-speed Manual, a traditional Tiptronic automatic, or a high-tech 6/7-speed Dual-Clutch DSG transmission, the cast aluminum bracket shapes and internal rubber dampening weights differ slightly.

  • Drivetrain Strain Layout: Models utilizing 4Motion All-Wheel Drive apply higher initial rotational torque forces to the drivetrain mounts compared to Front-Wheel Drive models. Sourcing this genuine factory original Volkswagen piece ensures that your chassis rail bolt tracks, transmission casing mounting holes, and height profiles line up with absolute millimetric accuracy, preserving the critical alignment between your engine, axles, and front CV joints.

Suspended directly beneath the battery box where it absorbs constant engine torque twisting forces and road bumps makes the left gearbox mounting highly vulnerable to structural fatigue. Over years of daily commuting, the heavy engine-bay heat cycles dry out the factory vulcanized rubber block, causing it to harden, develop deep cracks, and eventually tear or collapse entirely under the weight of the transmission. Once the rubber membrane splits, the mounting can no longer isolate the drivetrain’s moving forces from the vehicle’s unibody chassis frame.

A collapsed or torn left transmission mount will immediately ruin your cabin comfort and can lead to severe mechanical damage. The failure typically displays itself through an intrusive rattling or humming vibration felt directly through the floorboards and steering wheel at idle, an audible “thud” or clunking noise when accelerating or reversing, or jerky gear changes as the transmission rocks excessively in its cradle. If left ignored, a dropped mount lets the drivetrain sag, putting severe angular stress on your drive shafts, stretching electrical wiring looms, and accelerating wear on the right-side engine mount and lower pendulum subframe stretch-bolts. Swapping out the failed unit with this workshop-vetted factory original restores your vehicle’s factory-quiet cabin acoustics and locks your gearbox securely back into its engineered spatial position.

Manufactured using high-strength cast aluminum alloy and premium, UV-resistant high-density rubber compounds designed to flex without tearing, each mounting undergoes strict physical tolerances checking. Every item is verified for rubber firmness, the bolt threads are checked for stripping, and the main bracket is cleared of grease. Trust TP German Auto Spares for fully verified, workshop-inspected Volkswagen engine mounts, gearbox brackets, subframe bushings, drive shafts, and mechanical spares that protect the refined ride quality and safety values of your Tiguan.

Technical Workshop Installation & Drivetrain Alignment Note: This item is supplied as a complete operational left-side transmission mounting unit with its integrated rubber dampening core. Replacing this mounting requires proper equipment; the technician must securely support the underside of the gearbox with a transmission jack before loosening any chassis bolts. Because this mount sits directly underneath the vehicle’s battery, the battery, plastic tray, and engine air filter housing must be completely removed to gain top-side service access. Always use new high-tensile stretch bolts where specified by factory instructions and torque them precisely to prevent threads backing out under heavy cornering loads.

Key Features:

• 5N Platform Chassis Alignment: Cast and molded precisely to match the left-side frame rails of all 2010–2016 Tiguan models.

• High-Density Vulcanized Rubber: The internal rubber core is checked under pressure to ensure zero deep structural tears or advanced rubber sagging.

• Perfect Thread Integrity: All chassis and transmission casing mounting bolt apertures feature completely clean, unstripped threads.

• Torque-Tested Bracket Frame: The cast aluminum wing bracket is verified entirely free from hairline stress fractures or impact deformation.

• Condition: Premium low-mileage used or refurbished original factory mechanical support component; cleaned, performance-tested, and completely ready for chassis integration.