VW Touareg 7L 5.0 V10 TDI Radiator Cooling Fan | OEM Fan Assembly (2002 – 2010)
R4,725.00
Restore engine cooling performance. Genuine original factory VW Touareg 7L 5.0 V10 TDI radiator cooling fan assembly from TP German Auto Spares.
Order securely online with fast nationwide Delivery. Pay instore with PayFlex.
Compatibility
Brand: VW
Model: Touareg
Nationwide shipping on all orders!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
Description
Keep your monstrous 5.0L V10 engine running at optimal operating temperatures with this premium original VW Touareg 7L Radiator Cooling Fan Assembly. Hand-selected from low-mileage donor vehicles and verified for silent, vibration-free operation, this heavy-duty fan module is designed specifically to handle the immense heat rejection requirements of the V10 TDI (AYH/BLE/BWF) platform. It is the definitive replacement for units suffering from burnt-out electric motors, seized fan blades, or cracked plastic shrouds.
Please note the specific high-performance cooling architecture required for the V10 TDI: The Touareg 7L V10 utilizes an aggressive, dual-fan shroud configuration (or high-output single-motor assembly depending on the specific VIN) to pull massive volumes of air through the radiator stack.
-
Precision Control Module: These fans communicate directly with the engine’s CAN-bus system to vary speed based on engine coolant temperature, A/C compressor pressure, and oil temp. Sourcing this genuine original ensures full, seamless compatibility with your vehicle’s factory fan control module ($FCM$) and engine ECU, preventing “overheating” warning lights that frequently occur when installing inferior aftermarket fans.
-
Structural Integrity: Genuine fan assemblies come pre-mounted in their original heat-resistant thermoplastic housing, ensuring the blades are perfectly centered in the radiator shroud tunnel for maximum airflow efficiency.
As the V10 TDI produces immense under-hood heat, the radiator fan is one of the most hardworking components on your vehicle. Over time, the internal motor brushes wear down, or the bearings seize due to accumulated road grit and moisture, causing the fan to struggle or fail entirely. A failing fan assembly is a critical hazard for the V10 engine; if the fans stop spinning in city traffic or during stop-and-go commuting, engine coolant temperatures will spike rapidly, putting your cylinder heads, turbochargers, and transmission oil cooler at immediate risk of thermal breakdown.
Signs your cooling fan assembly requires replacement:
-
Engine Temperature Spikes: The coolant gauge needle creeping above the middle mark during idling or heavy traffic.
-
A/C Performance Loss: The A/C system stops blowing cold air immediately when the vehicle stops moving, as the fan is not providing the necessary airflow to the A/C condenser.
-
Audible Warnings: A loud grinding or screeching noise coming from the front engine bay, or the total absence of the “whooshing” sound expected when the fans kick into high gear.
-
Diagnostic Codes: Recurring engine check lights related to “Fan Speed Control Circuit” or “Coolant Fan Short to Ground.”
Technical Workshop Removal & Electrical Warning: Replacing a radiator fan assembly on a V10 TDI is a complex task due to the limited clearance in the engine bay. The vehicle often requires being placed into “Service Position” (removing the front bumper, grille, and pulling the radiator support forward) to access the assembly safely. During reinstallation, ensure that the electrical harness connectors are clicked in firmly and that the foam seals around the shroud are intact; these seals are vital for forcing air through the radiator core rather than letting it bypass around the edges. Always clear any existing diagnostic fault codes after installation to ensure the Fan Control Module correctly re-calibrates the new motor speeds.
Key Features:
-
V10 TDI Specification: Engineered to handle the extreme cooling load of the 5.0L AYH/BLE engine block.
-
Plug-and-Play Integration: Original wiring harness plugs and mounting points ensure a direct bolt-in fitment with no modifications required.
-
Factory-Balanced Blades: High-speed rotation blades are factory-balanced to prevent unwanted engine bay vibrations and acoustic resonance.
-
Condition: Premium used factory original electrical and mechanical component; rigorously tested for motor health, smooth blade rotation, and controller responsiveness.






Reviews
There are no reviews yet.